 |
 |
| Welcome to the Reloading Page of Outdoors Louisiana. Here you will find favorite "pet" loads from people that really love to reload, and feel that what they produce, far out performs what's available over the counter! No matter what your favorite load is, be it a steel load for waterfowling, a pistol load, or a rifle load send it in, and we'll post it here! |
| Warning : Reloading can be dangerous and may cause injury or damage to firearms, Outdoors Louisiana accepts no responsiablity for accuracy of any recipies listed, use them at your own discreation!! These loads are sent in by EXPERIENCED reloaders and are to be used as guidlines, they are not responsiable for any damage or injury caused by using this data. Other reloading information can be found on the Links Page of this site, under Firearms and Reloading! |
 |
| click on banner to return to home page |
| 10 Gauge "Master" Load Hull : Federal with paper base wad Powder : 39.5 grns. (IMR) SR4756 Primer : Winchester W209 Shot Charge : 1 1/2 ounce steel shot Wad : RSI Sam1 10 ga. 3 1/2 in. plus add two (2) 1/8 in. 12 ga. felts Velocity : 1,425 fps. Pressure : 10,700 psi. Notes : This load performs good in the Gold 10 and the SP 10 with Improved Modified choke. Best with #1 thru T shot. Good long range load with duplex shot charges |
| Ballistic Products 10 Gauge Hull : Federal paper base wad Powder : 46.0 grns Alliant "Steel" Primer : Federal 209A Shot Charge : 1 1/2 ounce steel shot Wad : Bp Multi-Metal with one 1/8 12 ga. felt and buffer mix 47 Velocity : 1,530 fps. Pressure : 10,900 psi. Notes : I load this load with #1 steel shot, minus the buffer and felt, add thin over shot card, recessed crimp. Improved Cylinder choke in the Gold 10 |
| TengaOkie |
| TengaOkie |
| Alliant 3 inch 12 gauge Hull : Federal Intergal basewad Powder : 40.5 grns Alliant "Steel" Primer : Federal 209A Shot Charge : 1 1/8 ounce steel shot Wad : RSI 3 inch and add one 1/8 inch 20 gauge felt Velocity : 1,520 fps. Pressure : 10,700 psi. Notes : |
| 12 Gauge 3 Inch Load Hull : Active 3 inch Powder : 40.0 grns Alliant "Steel: Primer : CCI 209M Shot Charge : 1 1/8 ounce steel shot Wad : BP Multi-Metal 12234 Velocity : 1,590 fps. Pressure : 10,900 psi. Notes : I load this with steel #3 shot and found it to a deadly duck load out to fifty yards. How ever, I didn't care for the recoil as it is a might bit on the heavy side for me! |
| TengaOkie |
| Mudhole |
| 12 Gauge 3 Inch Load Hull : Active 3 inch Powder : 37.0 grns Alliant "Steel" Primer : CCI 209M Shot Charge : 1 1/8 ounce steel shot Wad : BP Multi-Metal and no fillers Velocity : 1,500 fps. Pressure : 10,900 psi. Notes: I liked this load at lot, but have settled on a 38.0 grain powder charge with all esle being the same as listed. |
| 12 Gauge 3 Inch Load Hull : Active 3 inch Powder : 44.0 grns Alliant "Steel" Primer : CCI 209M Shot Charge : 1 ounce steel shot Wad : BP Multi-Metal and one 1/8 inch 20 ga. felt Velocity : 1,680 fps. Pressure : 10,400 psi. Notes : |
| Mudhole |
| Mudhole |
| 12 Gauge 2 3/4 in. Bismuth Load Hull: Federal Gold Medal 2 3/4 in. Powder : 29.5 grns. SR 4756 Primer : CCI-209M Shot Charge : 1 1/8 ounce bismuth Wad : BP CSD100 and one 1/8 in. 20 ga. cork filler Velocity : 1335 fps. Pressure : 10,300 psi. Notes : This load can be used with either #6 or #4 bismuth, I liked the 4's better! |
| Mudhole |
| 12 Gauge 2 3/4 in, Bismuth Load Hull : Federal Gold Medal 2 3/4 in. Powder : 30.0 grns. SR 4756 Primer: CCI-209M Shot Charge : 1 ounce bismuth Wad : BP CSD100 and one 1/4 in. 20 ga. cork filler Velocity : 1380 fps. Pressure : 10,100 psi. Notes : Best shot sizes are #6 and #4, adjust to your shooting ranges. |
| Mudhole |